How to Combine a Wind Turbine with SolaX Hybrid Inverters

How to Combine a Wind Turbine with SolaX Hybrid Inverters — Complete Guide for Installers

As demand grows for more energy independence and hybrid renewable systems, combining solar PV, battery storage, and wind power is no longer a futuristic concept — it’s a practical, installable solution. With SolaX inverters, this integration is easier than ever, thanks to native software support, dedicated input ports, and full wind turbine compatibility.

At PVSolar Store, in cooperation with Solar&Solar Wholesale, the official distributor of SolaX Power, we provide the full SolaX inverter portfolio — including the latest X3 Hybrid G4 and X1 Mini G4 models — now fully compatible with third-party wind turbines. All products are in stock and ready for shipment, including accessories and smart energy solutions.

Hybrid PV + Wind + Battery System: What Installers Need to Know

While wind turbines are not universally suited to all solar installations, in the right location (with average wind speeds over 4–5 m/s), they significantly increase year-round system performance — particularly in cloudy weather, at night, or during winter.

Benefits include:

• ✅ Power generation when solar is low (night/cloudy days)

• ✅ Perfect for remote or weak-grid areas

• ✅ Higher ROI in windy zones with battery storage

• ✅ Seamless integration into SolaX hybrid inverters

• ✅ Full remote monitoring via SolaX Cloud

How to Connect a Wind Turbine to SolaX Inverters

SolaX inverters like the X3-Hybrid G4 and X1-MINI G4 support wind turbine inputs through their MPPT PV ports (PV1 or PV2), using a DC-coupled configuration. This allows flexible installation with maximum safety, even in off-grid or backup power systems

Practical connection flow:

Turbine → Wind Controller (with protection) → Rectifier → SolaX inverter PV input
💡 Always ensure safe DC voltage and proper grounding. The turbine must not be spinning during connection.

Key technical conditions:

• Wind turbine output must be converted to DC using a rectifier

• Use a dedicated wind controller with safety unload/breaker

• Input voltage range: 120–600 V DC (X3 G4)

• PV1 current limit: ≤ 20 A, PV2: ≤ 10 A

• Set up VA curve (VA1 to VA12) directly in the inverter LCD menu to match turbine output

You can enable wind turbine support via:
Settings > Advanced Settings > Wind Turbine 1/2 > Enable, then configure VA Setup per port

SolaX Smart Integration: Full Control via LCD & Cloud

Once connected, the SolaX inverter allows manual VA curve input — mapping voltage to current at 12 intervals — acting as a safety limiter. This prevents inverter or turbine damage by defining safe input conditions (e.g., VA12 = 600 V / 20 A).

This feature is supported on:

• ✅ X3-Hybrid G4 (DSP_V1.51; ARM_V1.49)

• ✅ X1-MINI G4 (DSP_V090.91; ARM_V027.03)

• 🔄 Coming soon to X3-ULTRAWind Turbine & SolaX IN…

Future firmware updates will allow VA curve setup via SolaX Cloud or mobile app, making remote configuration and diagnostics even easier.

Expand Your PV Offering — Why Add Wind to Solar Systems?

Installers who offer hybrid PV–wind systems stand out in competitive markets. You’ll deliver more value to clients with:

• Systems that generate at night or in low-sun months

• Stable off-grid capability for rural or weak-grid zones

• Retrofit flexibility without inverter replacement

• Integrated service and monitoring through SolaX Cloud

Combined solar and wind systems represent the next evolution in distributed energy. The integration is technically elegant, scalable, and — with SolaX — surprisingly simple.

Available Now at PVSolar Store

Looking to add wind-compatible hybrid inverters to your offering? As the official Solplanet and SolaX distributor, Solar&Solar Wholesale provides full access to the X3-Hybrid G4,X1-MINI G4, X3-ULTRA series, and more — all tested for real-world wind turbine integration.

📞 +36 70 325 2122
📧 info@pvsolarstore.com

Ask about project support, connection diagrams, or availability today.