Solplanet ASW Series WiFi Configuration: Step-by-Step Guide

Configuring the WiFi for Solplanet ASW series inverters allows for simple and efficient remote monitoring. Follow this guide to set up the WiFi connection quickly and easily.

1. Required Tools and Preparation

Required Tools

• WiFi-enabled smartphone or laptop
• Solplanet inverter
• WiFi router with internet access

Preparation

• Ensure the inverter is properly installed and connected.
• Verify that the WiFi network is stable and has a strong signal at the inverter’s location.

2. WiFi Configuration Steps

A. Enabling the WiFi Module

1. Turn on the inverter.
2. Check that the WiFi module is activated.

B. Connecting a Smartphone or Laptop

1. Open WiFi settings on the smartphone or laptop.
2. Find and connect to the WiFi network broadcast by the inverter (SSID).

C. Configuration via Web Interface

1. Open a browser and enter the WiFi module’s IP address.
2. Log in with the provided username and password.

D. Setting Up the WiFi Network

1. In the web interface, select the WiFi settings menu.
2. Find the available WiFi networks and select your router.
3. Enter the WiFi network password and save the settings.

3. Verification and Testing

A. Checking the Connection

1. In the web interface, verify that the inverter is successfully connected to the WiFi network.
2. Monitor the status indicators on the display to ensure proper connection.

B. Syncing Data

1. Open the Solplanet monitoring application.
2. Log in to your account and sync the data with the inverter.

4. Troubleshooting

Common Problems and Solutions

• Weak WiFi Signal: Move the inverter closer to the router or use a signal booster.
• Incorrect Password: Verify the WiFi password and try again.
• No IP Address: Restart the inverter and the router, then try connecting again.

Proper configuration of the WiFi for Solplanet ASW series inverters is essential for efficient system monitoring and management. For more information, visit the official Solplanet website.